title: Image entry

import AutoScreenshot from "@components/AutoScreenshot.astro" import UtilityInjection from "@components/UtilityInjection.astro"

Introduction

Infolists can render images, based on the path in the state of the entry:

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('header_image')

In this case, the header_image state could contain posts/header-images/4281246003439.jpg, which is relative to the root directory of the storage disk. The storage disk is defined in the configuration file, local by default. You can also set the FILESYSTEM_DISK environment variable to change this.

Alternatively, the state could contain an absolute URL to an image, such as https://example.com/images/header.jpg.

Managing the image disk

The default storage disk is defined in the configuration file, local by default. You can also set the FILESYSTEM_DISK environment variable to change this. If you want to deviate from the default disk, you may pass a custom disk name to the disk() method:

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('header_image')
    ->disk('s3')

<UtilityInjection set="infolistEntries" version="5.x">As well as allowing a static value, the disk() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

Public images

By default, Filament will generate temporary URLs to images in the filesystem, unless the disk is set to public. If your images are stored in a public disk, you can set the visibility() to public:

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('header_image')
    ->visibility('public')

<UtilityInjection set="infolistEntries" version="5.x">As well as allowing a static value, the visibility() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

Customizing the size

You may customize the image size by passing a imageWidth() and imageHeight(), or both with imageSize():

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('header_image')
    ->imageWidth(200)

ImageEntry::make('header_image')
    ->imageHeight(50)

ImageEntry::make('author.avatar')
    ->imageSize(40)

<UtilityInjection set="infolistEntries" version="5.x">As well as allowing a static values, the imageWidth(), imageHeight() and imageSize() methods also accept functions to dynamically calculate them. You can inject various utilities into the function as parameters.</UtilityInjection>

Square images

You may display the image using a 1:1 aspect ratio:

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('author.avatar')
    ->imageHeight(40)
    ->square()

Optionally, you may pass a boolean value to control if the image should be square or not:

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('author.avatar')
    ->imageHeight(40)
    ->square(FeatureFlag::active())

<UtilityInjection set="infolistEntries" version="5.x">As well as allowing a static value, the square() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

Circular images

You may make the image fully rounded, which is useful for rendering avatars:

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('author.avatar')
    ->imageHeight(40)
    ->circular()

Optionally, you may pass a boolean value to control if the image should be circular or not:

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('author.avatar')
    ->imageHeight(40)
    ->circular(FeatureFlag::active())

<UtilityInjection set="infolistEntries" version="5.x">As well as allowing a static value, the circular() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

Adding a default image URL

You can display a placeholder image if one doesn't exist yet, by passing a URL to the defaultImageUrl() method:

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('header_image')
    ->defaultImageUrl(url('storage/posts/header-images/default.jpg'))

<UtilityInjection set="infolistEntries" version="5.x">As well as allowing a static value, the defaultImageUrl() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

Stacking images

You may display multiple images as a stack of overlapping images by using stacked():

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('colleagues.avatar')
    ->imageHeight(40)
    ->circular()
    ->stacked()

Optionally, you may pass a boolean value to control if the images should be stacked or not:

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('colleagues.avatar')
    ->imageHeight(40)
    ->circular()
    ->stacked(FeatureFlag::active())

<UtilityInjection set="infolistEntries" version="5.x">As well as allowing a static value, the stacked() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

Customizing the stacked ring width

The default ring width is 3, but you may customize it to be from 0 to 8:

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('colleagues.avatar')
    ->imageHeight(40)
    ->circular()
    ->stacked()
    ->ring(5)

<UtilityInjection set="infolistEntries" version="5.x">As well as allowing a static value, the ring() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

Customizing the stacked overlap

The default overlap is 4, but you may customize it to be from 0 to 8:

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('colleagues.avatar')
    ->imageHeight(40)
    ->circular()
    ->stacked()
    ->overlap(2)

<UtilityInjection set="infolistEntries" version="5.x">As well as allowing a static value, the overlap() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

Setting a limit

You may limit the maximum number of images you want to display by passing limit():

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('colleagues.avatar')
    ->imageHeight(40)
    ->circular()
    ->stacked()
    ->limit(3)

<UtilityInjection set="infolistEntries" version="5.x">As well as allowing a static value, the limit() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

Showing the remaining images count

When you set a limit you may also display the count of remaining images by passing limitedRemainingText().

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('colleagues.avatar')
    ->imageHeight(40)
    ->circular()
    ->stacked()
    ->limit(3)
    ->limitedRemainingText()

Optionally, you may pass a boolean value to control if the remaining text should be displayed or not:

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('colleagues.avatar')
    ->imageHeight(40)
    ->circular()
    ->stacked()
    ->limit(3)
    ->limitedRemainingText(FeatureFlag::active())

<UtilityInjection set="infolistEntries" version="5.x">As well as allowing a static value, the limitedRemainingText() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

Customizing the limited remaining text size

By default, the size of the remaining text is TextSize::Small. You can customize this to be TextSize::ExtraSmall, TextSize::Medium or TextSize::Large using the size parameter:

use Filament\Infolists\Components\ImageEntry;
use Filament\Support\Enums\TextSize;

ImageEntry::make('colleagues.avatar')
    ->imageHeight(40)
    ->circular()
    ->stacked()
    ->limit(3)
    ->limitedRemainingText(size: TextSize::Large)

Prevent file existence checks

When the schema is loaded, it will automatically detect whether the images exist to prevent errors for missing files. This is all done on the backend. When using remote storage with many images, this can be time-consuming. You can use the checkFileExistence(false) method to disable this feature:

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('attachment')
    ->checkFileExistence(false)

<UtilityInjection set="infolistEntries" version="5.x">As well as allowing a static value, the checkFileExistence() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

Adding extra HTML attributes to the image

You can pass extra HTML attributes to the <img> element via the extraImgAttributes() method. The attributes should be represented by an array, where the key is the attribute name and the value is the attribute value:

use Filament\Infolists\Components\ImageEntry;

ImageEntry::make('logo')
    ->extraImgAttributes([
        'alt' => 'Logo',
        'loading' => 'lazy',
    ])

<UtilityInjection set="infolistEntries" version="5.x">As well as allowing a static value, the extraImgAttributes() method also accepts a function to dynamically calculate it. You can inject various utilities into the function as parameters.</UtilityInjection>

By default, calling extraImgAttributes() multiple times will overwrite the previous attributes. If you wish to merge the attributes instead, you can pass merge: true to the method.

Infolists Laravel Package